PRODUCT FEATURES
Using CO2 gas as the laser light source, the marking accuracy is high, the speed is fast, the engraving depth can be controlled freely, and the laser power is large, which can be applied to engraving and cutting of various non-metallic products. No consumables, low processing cost, clear marking, high engraving and cutting efficiency, environmental protection and energy saving.
APPLICABLE MATERIALS
Marking, engraving, hollowing out and cutting of various non-metallic materials and products. It can mark, engrave, hollow out and cut various characters, symbols, graphics, images, barcodes, serial numbers, etc.
TECHNICAL PARAMETER
Model | LS-FA-20/30/60/80/100W |
Laser wavelength | 1064nm |
laser power | 20/30/60/80/100W |
frequency range | 1-1000KHz |
Pulse width range | 2-250ns |
Marking speed | ≤7000mm/s |
Minimum line width | 0.02mm |
Minimum character | 0.05mm |
Repeatability | ±0.1μm |
Marking range | 150mmx150mm(optional) |
Cooling mode | Air cooling |
Working power supply | AC220V/50Hz |
OTHER PRODUCTS